What are the treatment methods for wires and harnesses
1) Fix the wire and wire harness on the frame, and then install the frame to the designated position with bolts or wire clamps.
2) Disassemble the wire clamp carefully, and do not damage the locking mechanism.
3) Slide the pliers at the bottom of the fixing clip and pass through the hole at a certain angle, and then squeeze the expansion tongue to release the clip.
4) After installing the harness clamp, confirm that the harness does not interfere with any moving parts.
5) Keep the wiring harness away from exhaust pipes and other heat-generating parts, sharp edges of brackets and holes, and exposed screws and bolts.
6) Place the insulating rings in their grooves properly, and do not twist the insulating rings.